|
Lower 0.75mm Eccentric Suspension Holder (2+2)
#302041
Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.
|
|
|
Ackermann Extension Plate (2)
#302205
Set of CNC-machined graphite extension plates for mounting to steering blocks, providing a different Ackermann setup for improved steering for foam tire carpet racing. Includes all necessary mounting hardware.
|
|
|
Alu Steering Block Right For C-Hub Susp.
#302255
Alu Steering Block Right for C-Hub Suspension CNC-machined highest-quality duraluminum front right steering block for C-hub suspension. Includes two nylon bushings for ball-bearings.
|
|
|
Alu Steering Block Left For C-Hub Susp.
#302265
Alu Steering Block Left for C-Hub Suspension CNC-machined highest-quality duraluminum front left steering block for C-hub suspension. Includes two nylon bushings for ball-bearings.
|
|
|
Alu C-Hub For Steering Block - Caster 0°
#302275
CNC-machined highest-quality duraluminum C-hub with caster pre-set at 0 degrees for maximum off-power steering. Can be used for either left or right steering blocks; use only a matched pair of 0deg C-hubs together.
|
|
|
Composite C-Hub Front Block, Right - Soft - 3°
#302281
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Soft rigidity. Use with left-side composite 3° C-hub (soft) #302283.
|
|
|
Composite C-Hub Front Block, Left - Soft - 3°
#302283
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Soft rigidity. Use with right-side composite 3° C-hub (soft) #302281.
|
|
|
Composite C-Hub Front Block, Right - Soft - 6°
#302285
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Soft rigidity. Use with left-side composite 6° C-hub (soft) #302287.
|
|
|
Composite C-Hub Front Block, Right - Medium - 6°
#302286
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Medium rigidity. Use with left-side composite 6° C-hub (medium) #302288.
|
|
|
Composite C-Hub Front Block, Left - Soft - 6°
#302287
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Soft rigidity. Use with right-side composite 6° C-hub (soft) #302285.
|
|
|
Composite C-Hub Front Block, Left - Medium - 6°
#302288
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Medium rigidity. Use with right-side composite 6° C-hub (medium) #302286.
|
|
|
Composite C-Hub Front Block, Right - Hard - 3°
#302325
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Hard rigidity. Use with left-side composite 3° C-hub (hard) #302326.
|
|
|
Composite C-Hub Front Block, Left - Hard - 3°
#302326
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Hard rigidity. Use with right-side composite 3° C-hub (hard) #302325.
|
|
|
Composite C-Hub Front Block, Right - Medium - 4.5°
#302327
Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Medium rigidity. Use with left-side composite 4.5° C-hub (medium) #302328.
|
|
|
Composite C-Hub Front Block, Left - Medium - 4.5°
#302328
Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Medium rigidity. Use with right-side composite 4.5° C-hub (medium) #302327.
|
|
|
Composite C-Hub Front Block, Right - Hard - 4.5°
#302329
Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Hard rigidity. Use with left-side composite 4.5° C-hub (hard) #302330.
|
|
|
Composite C-Hub Front Block, Left - Hard - 4.5°
#302330
Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Hard rigidity. Use with right-side composite 4.5° C-hub (hard) #302329.
|
|
|
Composite C-Hub Front Block, Right - Hard - 6°
#302331
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Hard rigidity. Use with left-side composite 6° C-hub (hard) #302332.
|
|
|
Composite C-Hub Front Block, Left - Hard - 6°
#302332
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Hard rigidity. Use with right-side composite 6° C-hub (hard) #302331.
|
|
|
Roll Center Alu Holder - Set (2)
#303031
This set is used to relocate the inner mounting points for the rear camber links. Used with #303093 rear shocktower to utilize shorter camber links with short arm suspension, and also allows changes to rear roll center. Set includes alu pivot ball posts and mounting hardware.
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
⢠front and rear roll center
⢠front bump steer
⢠front and rear toe-in
⢠wheelbase
|
|
|
Alu Upright Rear For C-Hub Suspension
#303355
CNC-machined rear upright for C-hub suspension is made from highest-quality duraluminum. Can be used on either left or right side. Includes two nylon bushings for ball-bearings.
|
|
|
Ball Differential - Spring Steel - Set
#305001
XRAY is proud to present the smoothest, highest-quality differential in the RC industry! Manufactured exclusively for XRAY by HUDY, made from world-renowned top-secret Hudy Spring Steel, this high-performance differential set features an exclusive double slotted design, carbide diff balls, new axial ball-bearing with larger balls for smoother operation and ultra-high durability. Impossible to wear out!
|
|
|
One-Way Differential PRO - Set
#305101
Front One-Way Differential PRO for XRAY T1 or T1 EVO2. Front axle PRO machined from lightweight alloy, strategically machined for the lightest possible weight without compromising strength.
|
|
|
XRAY Multi-Diff T1, T1EVO2, T1R, T1M, T1FK
#305103
New, innovation and new patent ⓠthe XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.
|
|
|
Front Axle PRO With One-Way Bearings
#305111
Front axle for 305101 One-Way Differential PRO. CNC machined from lightweight aircraft duraluminum, strategically machined
for the lightest possible weight without compromising strength. Includes two precision press-fit INA one-way bearings.
|
|
|
Multi-Diff Locking Axle - Spring Steel
#305121
Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters.
|
|
|
Inner Driveshaft Adapter - Spring Steel (2)
#305131
Precision-machined, specially-lightened outdrives for use with all XRAY T1 front one-way axles (including Multi-Diff™). The new lightweight one-way out drives manufactured from Hudy Spring Steel have a hex hole machined at each end.
|
|
|
Delrin® Solid Axle Complete Set
#305181
Delrin® Solid Axle Complete Set is for serious racers looking for an edge. XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle complete set is a full-time solid axle only; all parts are included. Fits all XRAY touring cars.
Used by XRAY Factory Team - a "must have" for serious racers.
|
|
|
Delrin® Solid Axle Body - Lightweight
#305186
For serious racers looking for an edge, XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle transforms the XRAY Multi-Diff into a full-time solid axle only; remaining parts must be used from the Multi-Diff. Fits all XRAY touring cars.
Used by XRAY Factory Team - a "must have" for serious racers.
|
|
|
Wheel Axle â“ 22mm - Offset âś-1mmâť - Hard Coated (2)
#305312
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a -1mm offset which means that they are 1mm shorter than standard wheel axles.
|
|
|
Wheel Axle â“ 22mm - Offset âś+1mmâť - Hard Coated (2)
#305313
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a +1mm offset which means that they are 1mm longer than standard wheel axles.
|
|
|
Wheel Axle - 22 mm - Integr. Hex Hub - Spring Steel (2)
#305315
Optional wheel axles manufactured for XRAY by HUDY from the world-famous top-secret "Hudy Spring Steel(TM)". These are a direct replacement for the original duraluminum wheelaxles, and will be virtually impossible to damage or wear out. The wheelaxles are strategically CNC-machined so they are as light as possible to reduce rotating mass, while maintaining ultimate strength.
|
|
|
Main Layshaft With Supporting Hardware
#305500
A complete central layshaft assembly. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel" with press-fit adapter. The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is precisely pressed directly onto the layshaft to give ultra-true spur gear rotation. The set includes also one-way pulley, fixed pulley and one-way adjustment nut.
|
|
|
Solid Alu Central Layshaft Set
#305502
Solid central layshaft set for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential.
|
|
|
Layshaft Spring Steel Integr. Spur G. Adapter EVO2
#305511
Central layshaft with press-fit adapter. The layshaft is manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel". The hollow layshaft construction provides ultra low weight and low rotating mass. The adapter is accurately pressed directly onto the layshaft to give ultra-true spur gear rotation.
|
|
|
Solid Alu Central Layshaft
#305515
CNC-machined strategically-lightened Solid central layshaft for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential.
|
|
|
Low Ratio Pulley Set (ratio 1.77)
#305550
New high-performance option set of low ratio pulleys. The set includes 32T front and rear differential pulleys and Labyrinth Dust Covers (TM), 32T pulley for front one-way, and 18T central layshaft pulleys.
|
|
|
One-Way Pulley With Grooved One-Way Bearing
#305582
New one-way bearing for the middle shaft. This bearing has grooves on its outer surface that will prevent any potential rotational slippage inside the nylon pulley.
|
|
|
Composite Offset Spur Gear 92T / 64
#305862
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Composite Offset Spur Gear 96T / 64
#305866
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Composite Offset Spur Gear 99T / 64
#305869
Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Composite Offset Spur Gear 100T / 64
#305870
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Narrow Pinion Gear Alu Hard Coated 40T/64
#305990
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 42T/64
#305992
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 44T/64
#305994
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 46T/64
#305996
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v
|
|
|
Narrow Pinion Gear Alu Hard Coated 48T/64
#305998
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 50T/64
#306000
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Stickpack Holder 1/12 - Graphite - Blue
#306179
CNC-machined graphite stickpack holder set allows the use of 4-cell stickpacks in the XRAY T1 Mini. Complete set includes upper graphite plate, composite posts, and all mounting hardware.
|
|
|
Alu Shock Spring Retaining Collar (4)
#308031
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened.
|
|
|
Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color.
|
|
|
Shock Absorber Membranes - Low
#308081
Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment.
|
|
|
Shock Foam Inserts (4)
#308090
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Set of 4 pieces.
|
|
|
Shock Foam Insert - Low (4)
#308091
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment.
|
|
|
Composite Shock Parts - Rebound Hole - Short
#308332
One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks.
|
|
|
XRAY Spring-Set C = 2.2 (2)
#308373
New ultimate-match shock springs (C = 2.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.2) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 2.4 (2)
#308374
New ultimate-match shock springs (C = 2.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.4) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 2.6 (2)
#308375
New ultimate-match shock springs (C = 2.6) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.6) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 2.8 (2)
#308376
New ultimate-match shock springs (C = 2.8) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.8) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 3.0 (2)
#308377
New ultimate-match shock springs (C = 3.0) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.0) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 3.2 (2)
#308378
New ultimate-match shock springs (C = 3.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.2) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 3.4 (2)
#308379
New ultimate-match shock springs (C = 3.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.4) on top spring coil for easy identification. Set of 2.
|
|
|
Additional XRAY Ultimate Racing Springs (20)
#308380
For even more fine tuning of suspension dampening, XRAY offers an additional set of ultra-fine tuning springs in addition to the basic set (#308390) of XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the springs in the basic set.
|
|
|
XRAY Spring-Set D=1.4 (14 LB) Gold (4)
#308382
Ultimate high-performance racing springs give you additional precision tuning options for your XRAY model racing car! Developed through extensive testing and racing experience, these racing springs were designed and precision-crafted to have a more progressive rate than standard XRAY racing springs. The new progressive XRAY spring sets were designed to give you an additional range of choices to fine tune your car.
|
|
|
XRAY Spring-Set D=1.5 (17.5 LB) Silver (4)
#308383
Ultimate high-performance racing springs give you additional precision tuning options for your XRAY model racing car! Developed through extensive testing and racing experience, these racing springs were designed and precision-crafted to have a more progressive rate than standard XRAY racing springs. The new progressive XRAY spring sets were designed to give you an additional range of choices to fine tune your car.
|
|
|
XRAY Spring-Set D=1.5 (15 LB) Blue-Green (4)
#308384
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.6 (20 LB) Light-Blue (4)
#308385
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.7 (25 LB) Dark-Blue (4)
#308386
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.8 (30 LB) C=4.5 (4)
#308387
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.9 (35 LB) Light-Red (4)
#308388
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Selected Ultimate Racing Springs (24)
#308390
Ultimate high-performance racing springs, which provide precision tuning for your XRAY model racing car! Developed from extensive testing and racing experience, these racing springs were designed and precision-crafted to have a unique spring characteristic. The XRAY spring sets were designed to give you an optimum range of choices to fine tune your car.
|
|
|
XRAY Spring-Set D=1.4 (14 LB) Yellow - Super Soft (4)
#308393
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: Yellow
Tension: Very Soft
NOT interchangeable with yellow springs for Serpent shocks - 308096 Spring-set D=1.6 Yellow (2+2)
|
|
|
XRAY Spring-Set D=1.5 (17.5 LB) White - Soft (4)
#308394
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: White
Tension: Soft
NOT interchangeable with yellow springs for Serpent shocks - 308095 Spring-set D=1.5 White (2+2)
|
|
|
XRAY Spring-Set D=1.8 (33 LB) Purple - Medium-Hard (4)
#308397
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: Purple
Tension: Medium-Hard
NOT interchangeable with purple springs for Serpent shocks - 308093 Spring-set D=1.3 Purple (2+2)
|
|
|
Tires XXT-M for Asphalt (2)
#309617
Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.
|
|
|
Balancing Chassis Weights (Front - 2pcs.)
#309820
Precision chassis weights
A complete set of 2 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the front of the chassis but fits any other race car as well. Made from brass.
|
|
|
Balancing Chassis Weights (Rear - 6 pcs.)
#309830
Precision chassis weights
A complete set of 6 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the rear of the chassis but fits any other race car as well. Made from brass.
|
|
|
Balancing Chassis Weights (Center - 3 pcs)
#309850
Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.
|
|
|
Spring-Set C=3.6 - Soft-Medium Hard - Rear (2)
#338286
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
Spring-Set C=4.5 - Medium-Medium Hard - Rear (2)
#338287
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
XRAY Springs - Set D=1.9 (35 LB) Light Red - Hard - Rear (2)
#338288
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
XRAY Springs - Set C=4.0 - Medium - Rear (2)
#338296
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
XRAY Springs - Set C=5.0 - Medium-Hard - Rear (2)
#338297
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
Ceramic Ball 2.4mm (12)
#930220
Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities.
|
|
ID |
Product Name |
Released |
305784-O |
|
May 27, 2019 |
305866-O |
|
May 27, 2019 |
305870-O |
|
May 27, 2019 |
305880-O |
|
May 27, 2019 |
303125-O |
|
Sep. 10, 2018 |
941014 |
|
Mar. 21, 2018 |
305869 |
|
Nov. 14, 2017 |
305772 |
|
Apr. 11, 2017 |
305776 |
|
Apr. 11, 2017 |
305779 |
|
Apr. 11, 2017 |
303126-K |
|
Mar. 24, 2017 |
305860 |
|
Jan. 03, 2017 |
305989 |
|
Oct. 21, 2016 |
305993 |
|
Oct. 21, 2016 |
305997 |
|
Oct. 20, 2016 |
308031-K |
|
Apr. 06, 2016 |
303125 |
|
Oct. 24, 2014 |
303125-K |
|
Oct. 24, 2014 |
309612 |
|
Dec. 06, 2013 |
309617 |
|
Dec. 06, 2013 |
| |
|
|